Page 9-9
S
ECTION
9 - C
OMPONENT
R
EPAIR
Cooktop Component Repair
General
To make repairs to the cooktop gas supply lines (flex tubes), remove the
spill trays. See page 8-7 for instructions. Each burner is fed by two (2)
flex tubes from the valve. The larger flex tube is the main gas supply
line. It supplies gas to the main orifice on each burner. The smaller
flex tube is the simmer line. It supplies gas to the simmer orifice on
each burner assembly. The simmer line supplies the low volume of gas
required to keep the burner lit at low flame levels.
See the schematic below for details on the routing of the various gas
lines.
To external gas shut off
valve and gas supply line.
Simmer Orifice Lines (3/16”)
Main Orifice Lines (5/16”)
Manifold Lines (3/8”)
Regulator to Tee (5/8”)
Regulator: Behind back panel
Tee: Located under spill tray
Left Manifold
Right Manifold
Left Front
Left Rear
Center Rear
Center Front
Right Front
Right Rear
COOKTOP GAS LINES