DAC Monitoring and Control System
User Manual Data Logger and Tower Meter
DL-PDL_General-User-Manual
_ve_2-0-2.docx
Page 65
Alarm list
Severity
Update interval
Possible Cause
TX Interface
inconsistency
Urgent
++
Every ATS polling
cycle.
Tx Interface inconsistency. Position
of the relay does not match the state
of the rule.
Rule activated
Revertive
Urgent
++
Every PDL/JB polling
cycle.
Rule activated Revertive
Rule activated
Non Revertive
Urgent
++
Every PDL/JB polling
cycle.
Rule activated Non Revertive
PDL Hardware
mismatch
Urgent
+++
Every PDL/JB polling
cycle.
PDL HW has a failure
*) Only active if a threshold PTx value is entered for every sensor to be supervised
**) Only supported by the Temp.-Detector
+) Only supported by JB version >3.x or the PDL
++) only supported by SW Release >= 1.4.x
+++) only active in the Tower Meter