DAC Monitoring and Control System
User Manual Data Logger and Tower Meter
DL-PDL_General-User-Manual
_ve_2-0-2.docx
Page 87
14.7 Rules & Status
The heart of the ATS is the rule engine, please read very carefully the following chapter.
Caution
One rule engine can control several ATSB / Tx Interface, but it is
NOT
possible that more than 1
rule engine controls the same ATSB / Tx Interface.
Note 1: An active rule cannot be edited!
Double click
or front line
selection
allows to
Edit the
rule, Note 1.
Rule Status line:
Rule Name
No. of conditions
No. of actions
Status of the rule:
o
deactivated – green – default
o
activated – red - active
Create a new rule
In the Rule mask a new rule is configured, but
also it gives a rule overview. Each condition and
action are displayed separately:
the name can be set
new conditions added or edited
new actions added or edited
Status lines for
conditions, showing
source data of the
condition and the
logical connection to
the next condition.
Status lines for actions, showing the
Transmitter / ATSB selected and the
ATSB / Tx Interface controlled.
To add a new condition
or a new action, click on
this button.