DAC Monitoring and Control System
User Manual Data Logger and Tower Meter
DL-PDL_General-User-Manual
_ve_2-0-2.docx
Page 43
9.7 Configuration of the Sensor
Configuration Mask for Sensor Model A - L
Depending on the type of JB/PDL the numbers of possible
sensors/interfaces are displayed in the menu. The status line
gives all relevant sensor information. If you want to
Edit
a sensor, use the front line selection or double click on
status line.
Click save
button after
changing
parameters.
To find fast the required
sensors, filters are available.
Set the
frequency
band and
operation/
transmission
frequency for
proper PTx
calculation.
If a sensor is
enabled
it is
displayed on the dashboard,
creates alarms and trend
curves are available.
Rx/TX signals are
computed in
reverse (RF in
reversed).
All sensors can be
Enabled/Disabled with one click.
The set button
will reset to the
Default values.
Select
Sensor
menu