Owner’s Manual
98
APPENDIX A – WIA (WINDOWS IMAGE AQUISITION)
Figure 82 - Viewing the X - Ray Image
Remarks:
The WIA Driver is only compatible with Windows 7 and 8 operating systems. It may require authentication
for Windows 8.
The image generated by the EAGLE.PS equipment is grayscale, so it is not possible to get it colored.
APPENDIX B – WINDOWS FIREWALL CONFIGURATION– SERVER MODE
These are the steps to open
5431
port on the windows firewall so that client-mode software can be
connected to the server.
ATTENTION: Client mode installation must be done after performing this procedure on the server.
Note
The procedure was performed with Windows 7.
1. To open Windows Firewall, click the
Start
button, and then click
Control Panel
. In the search box, type
firewall, then click
Windows Firewall
.
2. In the left panel, click
Advanced Settings
. Administrator permission is required. If you are prompted for
an Administrator Password or Confirmation, enter the Password or provide Confirmation.
3. In the
Windows Firewall
, Advanced Security dialog box, in the left panel, click In
Entry Rules
, and in
the right panel, click
New Rule.
4. Follow the assistant instructions for New Entry Rule.
Summary of Contents for EAGLE.PS
