Dabi Atlante EAGLE.PS, Owner'S Manual

Page: 73 / 102

Radiographic image scanner EAGLE.PS
73
CAUTIONS, RESTRICTIONS AND WARNINGS
Recommendations for equipment conservation
Your EAGLE.PS equipment has been designed and perfected within the standards of modern technology.
All appliances require special care, which are often overlooked for various reasons and circumstances,
here are some important reminders for your day to day. Try to respect these small rules that, incorporated
into the work routine, will provide great time savings and avoid unnecessary expenses.
Transport, storage and operation conditions
The equipment must be transported and stored with the following Remarks:
- Be careful not to suffer falls or impacts.
- With moisture protection, do not expose to rain, splashing water or moist soil.
- Keep in a place protected from rain and direct sunlight and in its original packaging.
- When transporting, do not move it on uneven surfaces and protect the packaging from direct rain and
Respect the maximum stacking stated on the outside of the package.
Environmental conditions for transportation or storage:
- Ambient temperature range for transport or storage -29ºC to + 60ºC.
- Relative humidity range for transport or storage 20% to 90%.
- Atmospheric pressure range 500hPa at 1060 hPa (375 mmHg to 795 mmHg).
Environmental conditions for operation:
- Ambient operating temperature range + 10ºC to + 40ºC.
- Recommended ambient temperature range + 21ºC to + 26ºC.
- Operating relative humidity range 30% to 75%.
- Atmospheric pressure range 700 hPa to 1060 hPa (525 mmHg to 795 mmHg).
- Operation altitude:
≤ 2000m.
Attention
The Equipment will maintain its safety and efficacy condition as long as it is kept (stored) as mentioned in
this operating instruction. In this way, the equipment will not lose or alter its physical and dimensional
characteristics.
Sensitivity to predictable environmental conditions under normal use
- The equipment is designed not to be sensitive to interference such as magnetic fields, external electrical
influences, electrostatic discharge, pressure or pressure variation, provided that the equipment is installed,
maintained, cleaned, stored, transported and operated in accordance with this instruction manual.
Precautions and warnings “during equipment installation”
- This equipment may only be unpacked and installed by an authorized DABI ATLANTE technician,
otherwise the warranty will be forfeited, since only it has the information, the appropriate tools and the
necessary training to perform this task.
- DABI ATLANTE shall not be liable for damages or accidents caused by improper installation carried out
by an unauthorized DABI ATLANTE technician.
- Only after the equipment has been installed and properly tested by the authorized DABI ATLANTE
representative, it will be ready to start the operations at work.
- The equipment should be installed in a level and stable position.
- Install the equipment in a place where it will not be damaged by pressure, temperature, humidity, direct
sunlight, dust or salts.