Dabi Atlante EAGLE.PS, Owner'S Manual

Page: 65 / 102

Radiographic image scanner EAGLE.PS
65
EQUIPMENT OPERATION
The system displays the following configuration option:
Quality *:
Represents the quality of the image to be obtained. Possible values: 'High' and 'Fast'.
Apply Zoom
These are the features that enable the operator to zoom in on an image. Zoom Select, Zoom In, Zoom Out
and Full Screen functions are available.
Figure 69 – Zoom Application Functionalities
The system provides the following types of zoom to apply to the image:
Zoom Select:
Represents the zoom application in a desired area by displaying the zoom located in the
area around the mouse pointer.
Zoom In:
Represents the approximation of the image when it has not been approximated, reaching an
approximation of up to 4 (four) times in relation to its original size.
Decrease Zoom:
Represents the distance of the image when it has not been distanced, reaching a
distance of up to 4 (four) times in relation to its original size.
Full Screen:
Represents the image expansion to occupy the largest available space on the screen.
Zoom:
Represents the zooming or zooming or zooming located back to the initial aspect ratio of the viewer.
Remarks:
Next image:
When this action is triggered, the system will display the image following the current one, in
the periodontal scheme. This option is available only when the system is in Full Screen mode.
Previous image:
When triggered this action, the system will display the previous image to the current one,
in the periodontal scheme. This option is available only when the system is in "Full Screen" mode. The
"Cancel Zoom" feature will only be accessible when you right-click;
When the operator applies an "Zoom In" to an image that is already at its maximum (400%) approximation
in relaction to its original size, the system will disable the zoom approximation icon
When the operator applies a "Zoom Out" to an image that is already at maximum distancing (25%) relative
to its original size, the system will disable the zoom-out icon.
When the operator applies a "Select with Zoom", the system disables the "Zoom in", "Zoom out", "Full
screen", "Counter-clockwise rotation", "Clockwise rotation", "Perform Calibration", "Measure Image ","
Annotate Image "and" Apply Settings and Filters ". In the same way, when applying the "Zoom In" and
"Zoom Out".
When the operator applies a "Full Screen", the system will disable the "Select with Zoom" icons,