D-Link xStack DGS-3426P, User Manual

Page: 130 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
XNS - Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in
the packet header is concurrent with this protocol. This packet header information is defined by
the Xerox Network Systems (XNS) Protocol.
VINES - Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in
the packet header is concurrent with this protocol. This packet header information is defined by
the Banyan Virtual Integrated Network Service (VINES) Protocol.
IPv6 - Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in
the packet header is concurrent with this protocol. This packet header information is defined by
the Internet Protocol Version 6 (IPv6) Protocol.
User Defined - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol defined by the user. This packet header
information is defined by entering the following information:
User Defined Packet ID - Specifies that the VLAN will only accept packets with this hexadecimal
802.1Q Ethernet type value in the packet header. The user may define an entry, in the
hexadecimal form (ffff) to define the packet identification. (The user only need enter the final four
integers of the hexadecimal format to define the packet ID – {hex 0x0 0xffff}) This field is only
operable if userDefined is selected in the Protocol ID field.
Encap [Ethernet | LLC | SNAP | All] – Specifies that the Switch will examine the octet of the
packet header referring to one of the protocols listed (Ethernet, LLC or SNAP), looking for a
match of the hexadecimal value previously entered.
All will instruct the Switch to examine the
total packet header. After a match is found, the Switch will forward the packet to this VLAN. This
field is only operable if
userDefined is selected in the Protocol ID field.
Port Settings Allows an individual port to be specified as member of a VLAN.
Tag Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will designate
the port as Tagged.
None
Allows an individual port to be specified as a non-VLAN member.
Egress Select this to specify the port as a static member of the VLAN. Egress member ports are ports
that will be transmitting traffic for the VLAN. These ports can be either tagged or untagged.
Forbidden Select this to specify the port as not being a member of the VLAN and that the port is forbidden
from becoming a member of the VLAN dynamically.
Click Apply to implement changes made.
116