D-Link xStack DGS-3426P, User Manual

Page: 230 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 9- 39. JWAC User Account window
To configure JWAC user settings for the Switch, go to the Security folder, open JWAC , click JWAC User Account , and click
the Add button, which will open the following window:
Figure 9- 4041. JWAC User Account Add Table window
To set the User Account settings for the JWAC by the Switch, complete the following fields and then click the Add button. To
clear the current JWAC user settings in the table at the bottom of the window, click the Delete All button.
Parameter Description
User Name Enter a username of up to 15 alphanumeric characters.
New Password Enter the password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirm New
Password
Retype the password entered in the previous field.
Click Apply to implement changes made.
To view JWAC user settings for the Switch, click on the Hyperlinked Show All JWAC User Accounts , which will open the
following window:
Figure 9- 41. JWAC User Account Table window
To add another JWAC user account for the Switch, click the Add button, to clear the existing entries click the Clear All button.
JWAC Host Information
The JWAC Host information Table allows the user to show or delete the hosts, which are handling or have been handled by the
switch.
To access the JWAC Host Table Settings for the Switch, go to the Security folder, open JWAC , and click JWAC Host
Information , which will open the following window:
216