D-Link xStack DGS-3426P, User Manual

Page: 127 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Protocol Type Header in Hexadecimal Form
IP over Ethernet 0x0800
IPX 802.3 0xFFFF
IPX 802.2 0xE0E0
IPX SNAP 0x8137
IPX over Ethernet2 0x8137
DEC LAT 0x6004
SNA 802.2 0x0404
netBios 0xF0F0
XNS 0x0600
VINES 0x0BAD
IPv6 0x86DD
AppleTalk 0x809B
RARP 0x8035
SNA over Ethernet2 0x80D5
Table 7- 2. Protocol VLAN and the corresponding type header
In configuring the user-defined protocol, the administrator must make sure that the pre-defined user type header does not match
any other type header. A match may cause discrepancies within the local network and failure to define the VLAN to which to
forward packets.
Static VLAN Entry
In the Layer 2 Features folder, click VLAN > Static VLAN Entries to open the following window:
Figure 7- 4. Current Static VLAN Entries window
The Current Static VLAN Entries window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the Current Static VLAN Entries window. A new window will appear,
as shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for
a description of the parameters in the new window.
113