D-Link xStack DGS-3426P, User Manual

Page: 120 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
106
•
•
Expand - to expand the SIM group, in detail.
Add to group - add a candidate to a group. Clicking this option will reveal the following screen for the user to enter a
password for authentication from the Candidate Switch before being added to the SIM group. Click OK to enter the
password or Cancel to exit the window.
Figure 6- 82. Input password window.
Property - to pop up a window to display the device information.
•
Menu Bar
The Single IP Management window contains a menu bar for device configurations, as seen below.
Figure 6- 83. Menu Bar of the Topology View
The five menus on the menu bar are as follows.
File
Print Setup - will view the image to be printed.
•
•
•
•
Print Topology - will print the topology map.
Preference - will set display properties, such as polling interval, and the views to open at SIM startup.
Group
Add to group - add a candidate to a group. Clicking this option will reveal the following screen for the user to enter a
password for authentication from the Candidate Switch before being added to the SIM group. Click OK to enter the
password or Cancel to exit the window.
Figure 6- 84. Input password window.
Remove from Group - Remove an MS from the group.
•
•
•
•
•
Device
Configure - will open the web manager for the specific device.
View
Refresh - update the views with the latest status.
Topology - display the Topology view.
Help
About - Will display the SIM information, including the current SIM version.