D-Link xStack DGS-3426P, User Manual

Page: 112 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
•
A MS can become a CaS by:
98
•
•
Being configured as a CaS through the CS.
If report packets from the CS to the MS time out.
•
The user can manually configure a CaS to become a CS
•
The CaS can be configured through the CS to become a MS.
After configuring one switch to operate as the CS of a SIM group, additional xStack DGS-3400 Series switch may join the group
by manually configuring the Switch to be a MS. The CS will then serve as the in band entry point for access to the MS. The CS’s
IP address will become the path to all MS's of the group and the CS’s Administrator's password, and/or authentication will control
access to all MS's of the SIM group.
With SIM enabled, the applications in the CS will redirect the packet instead of executing the packets. The applications will
decode the packet from the administrator, modify some data, then send it to the MS. After execution, the CS may receive a
response packet from the MS, which it will encode and send it back to the administrator.
When a CaS becomes a MS, it automatically becomes a member of the first SNMP community (include read/write and read only)
to which the CS belongs. However, if a MS has its own IP address, it can belong to SNMP communities to which other switches
in the group, including the CS, do not belong.
The Upgrade to v1.61
To better improve SIM management, the xStack DES-3400 series switches have been upgraded to version 1.61 in this release.
Many improvements have been made, including:
1. The Commander Switch (CS) now has the capability to automatically rediscover member switches that have left the SIM
group, either through a reboot or web malfunction. This feature is accomplished through the use of Discover packets and
Maintenance packets that previously set SIM members will emit after a reboot. Once a MS has had its MAC address and password
saved to the CS’s database, if a reboot occurs in the MS, the CS will keep this MS information in its database and when a MS has
been rediscovered, it will add the MS back into the SIM tree automatically. No configuration will be necessary to rediscover these
switches.
There are some instances where pre-saved MS switches cannot be rediscovered. For example, if the Switch is still powered down,
if it has become the member of another group, or if it has been configured to be a Commander Switch, the rediscovery process
cannot occur.
2. The topology map now includes new features for connections that are a
member of a port trunking group. It will display the speed and number of Ethernet
connections creating this port trunk group, as shown in the adjacent picture.
3. This version will support switch upload and downloads for firmware, configuration files and log files, as follows:
Firmware – The switch now supports MS firmware downloads from a TFTP server.
Configuration Files – This switch now supports downloading and uploading of configuration files both to (for configuration
restoration) and from (for configuration backup) MS’s, using a TFTP server..
Log – The Switch now supports uploading MS log files to a TFTP server.
4. The user may zoom in and zoom out when utilizing the topology window to get a better, more defined view of the
configurations.
NOTE: SIM Management does not support IPv6. For users wishing to utilize this function,
switches in the SIM group must be configured with IPv4 addresses. IPv6 for SIM management
will be supported in a future release of this switch.