D-Link xStack DGS-3426P, User Manual

Page: 214 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 9- 22. Enable Method List - Edit window
Figure 9- 23. Enable Method List - Add window
To define an Enable Login Method List, set the following parameters and click Apply :
Parameter Description
Method List Name Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4
The user may add one, or a combination of up to four (4) of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be authenticated using the local
enable password database on the Switch. The local enable password must be set by the user
in the next section entitled Local Enable Password.
none - Adding this parameter will require no authentication to access the Switch.
radius - Adding this parameter will require the user to be authenticated using the RADIUS
protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated using the TACACS
protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated using the XTACACS
protocol from a remote XTACACS server.
- Adding this parameter will require the user to be authenticated using the TACACS
protocol from a remote TACACS server.
server_group - Adding a previously configured server group will require the user to be
authenticated using a user-defined server group previously configured on the Switch.
200