D-Link xStack DGS-3426P, User Manual

Page: 73 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
SNTP Settings
Time Settings
To configure the time settings for the Switch, open the Administration folder. Then the SNTP Settings folder and click on the
Time Settings link, revealing the following window for the user to configure.
Figure 6- 25. Current Time: Status window
The following parameters can be set or are displayed:
Parameter Description
Current Time: Status
System Boot Time Displays the time when the Switch was initially started for this session.
Current Time Displays the Current Time.
Time Source Displays the time source for the system.
Current Time: SNTP Settings
SNTP State
Use this pull-down menu to Enabled or Disabled SNTP.
SNTP Primary Server The IP address of the primary server from which the SNTP information will be taken.
SNTP Secondary Server The IP address of the secondary server from which the SNTP information will be taken.
SNTP Poll Interval in
Seconds (30-99999) The interval, in seconds, between requests for updated SNTP information.
Current Time: Set Current Time
Year Enter the current year, to update the system clock.
Month Enter the current month, to update the system clock.
Day Enter the current day, to update the system clock.
Time in HH MM SS Enter the current time in hours, minutes, and seconds.
Click Apply to implement your changes.
59