xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6- 60. SNMP IPv6 Host Table Configuration window
The following parameters can set:
Parameter Description
Host IPv6 Address
Type the IPv6 address of the remote management station that will serve as the SNMP host
for the Switch.
SNMP Version
V1
- To specifies that SNMP version 1 will be used.
V2
- To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv
- To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv
security level.
V3-Auth-NoPriv
- To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv
- To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Community String or
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click
Apply.
To return to the
SNMP Host Table
, click the
Show All SNMP Host Table Entries
link.
SNMP Engine ID
The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the
SNMP engine on the Switch. To display the Switch's SNMP Engine ID, open the
SNMP Manger
folder, (located in the
Administration
)
folder and click on the
SNMP Engine ID
link. This will open the
SNMP Engine ID Configuration
window, as
shown below.
Figure 6- 61. SNMP Engine ID Configuration window
To change the Engine ID, type the new Engine ID in the space provided and then click the
Apply
button.
88
Summary of Contents for xStack DGS-3426P
Page 310: ...D Link D Link D Link D Link 495 744 00 99 http www dlink ru e mail support dlink ru...
Page 316: ...International Offices...
Page 318: ......
