xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
System Severity Settings
The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the alert
triggers either a log entry or a trap message can be set as well. Use the
System Severity Settings
menu to set the criteria for alerts.
The current settings are displayed below the System Severity Table. In the
Administration
folder, click
System Severity
Settings
, to view the window shown below.
Figure 6- 24. System Severity Settings
Use the drop-down menus to configure the parameters described below.
Parameter Description
System Severity
Choose how the alerts are used from the drop-down menu. Select
log
to send the alert of the
Severity Type configured to the Switch’s log for analysis. Choose
trap
to send it to an SNMP
agent for analysis, or select
all
to send the chosen alert type to an SNMP agent and the
Switch’s log for analysis.
Severity Level
Choose what level of alert will trigger sending the log entry or trap message as defined by the
Severity Name. Select
critical
to send only critical events to the Switch’s log or SNMP agent.
Choose
warning
to send critical and warning events to the Switch’s log or SNMP agent.
Select
information
send informational, warning and critical events to the Switch’s log or
SNMP agent.
Click
Apply
to implement the new System Severity Settings.
58
Summary of Contents for xStack DGS-3426P
Page 310: ...D Link D Link D Link D Link 495 744 00 99 http www dlink ru e mail support dlink ru...
Page 316: ...International Offices...
Page 318: ......