D-Link Nuclias DNH-100 User Manual Download Page 4

Page: 4 / 79

Nuclias Connect Software User Manual

Hardware Overview

Page 4

Hardware Overview

LED Indicators

LED

Description

Power

Solid Green - The device is powered on and ready for use,

and it is in standalone mode.

Blinking Green - The device is booting up.

Solid Red - Device is unable to boot .

Link Speed

(10/100 Mbps)

Solid Green - Port is operating at 10/100 Mbps

Light Off - No Link.

Link Speed

(1000 Mbps)

Solid Green - Port is operating at 1000 Mbps

Light Off - No Link.

Interface Connectors

# Connector Description

Reset

Used for rebooting or resetting the device back to

factory default settings.

Console

Port

RJ-45 port to connect the RJ-45 console cable for CLI

management .

3 Ethernet

Port

Gigabit RJ-45 port for LAN connection.

4 MicroSD

Slot

MicroSD slot for MicroSD card

1,2,3

up to 32 GB.

5 USB Port USB 3.0 Type A port

(provides 5V/1A power for

optional HDD connection).

Due to EU regulations the 16 GB MicroSD card is only included in the WW version.

Only FAT32 format is supported.

Do not remove the microSD card while the power is on as this may damage your card.

LED Indicators

Interface Connectors

Summary of Contents for Nuclias DNH-100
















































































Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands

D-Link Nuclias DNH-100, User Manual

Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands