D-Link Nuclias DNH-100 User Manual Download Page 70

Page: 70 / 79

Nuclias Connect Software User Manual

Appendix

Page 70

Nuclias Connect App

Discover and Configure APs Using the Nuclias Connect App

The Nuclias Connect App is a wireless access management tool that provides the means to easily manage single or multiple

sites and networks from your smartphone or tablet. With the Nuclias Connect App, you can quickly deploy standalone DAPs to

the Nuclias Connect, scan a network for D-Link access points or configure individual DAPs.

NOTE:

• Before attempting to import a network profile, ensure that you have access to the Nuclias Connect controller.

The Nuclias Connect App is available for both iOS and Android smart devices. The following functions are available:

• Quick Setup: Quickly and easily deploy your standalone DAP to the Nuclias Connect controller.

• Nuclias Connect: Manage your current sites and networks through Nuclias Connect.

• Standalone Access Point: You can change the configuration of individual DAPs and save the configuration profile to be

deployed to multiple DAPs.

Quick Setup

After opening the Nuclias Connect App, the following window will appear (iOS). Tap on Quick Setup to start the setup

process.

The next step is to select an AP provision profile. The profile is used to push to the selected DAPs. Tap

Quick Setup

to begin the

deployment of a standalone DAP to the Nuclias Connect server.

In the below example the Provision File entry shown is

None

Tap

Provision File

to display a list of available local profiles. If no locally stored profile exists, a pop-up page will appear with

further instructions on how to download a profile.

Tap

Download profile

in order to specify a connection to the Nuclias Connect controller.

Summary of Contents for Nuclias DNH-100
















































































Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands

D-Link Nuclias DNH-100, User Manual

Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands