D-Link Nuclias DNH-100 User Manual Download Page 79

Page: 79 / 79

Nuclias Connect Software User Manual

Appendix

Page 79

Nuclias Connect App

The Wireless settings menu is listed in the following figure.

Parameter

Description

Cancel

Tap to discard any changes and continue the process.

DAP

Displays the model name and IP address of the AP device.

2.4G SSID

SSID-#

Tap the slide button to enable or disable the SSID. The # character indicates

the identifying number of the SSID.

SSID Name

Tap to change the current name of the SSID.

Security

Tap to select a specific security protocol: Open System (default), WPA-

Personal, or WPA-Enterprise.

5G SSID
SSID-#

Tap the slide button to enable or disable the SSID. The # character indicates

the identifying number of the SSID.

SSID Name

Tap to change the current name of the SSID.

Security

Tap to select a specific security protocol: Open System (default), WPA-

Personal, or WPA-Enterprise.

Wireless Information
Radio Band

Tap to select a specific radio band: Off, 2.4G, 5G, or 2.4G / 5G.

Radio 2.4G

Mode

Tap to select a specific 2.4G radio mode: Mixed 802.11n, 80211g and 802.11b;

Mixed 802.11g, 802.11b; 802.11n Only.

Radio 5G Mode

Tap to select a specific 5G radio mode: Mixed 802.11n, 80211a; 802.11a Only;

802.11n; Mixed 802.11ac.

Country Code

Displays the assigned country designation for the DAP.

Copy & Save Configuration
Apply

Configuration

Tap to select an alternate discovered DAP device to push the current

configuration.

Save

Configuration

Tap to name and archive the current configuration profile.

Summary of Contents for Nuclias DNH-100
















































































Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands

D-Link Nuclias DNH-100, User Manual

Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands