D-Link Nuclias DNH-100 User Manual Download Page 66

Page: 66 / 79

Nuclias Connect Software User Manual

Nuclias Connect Configuration

Page 66

System

Settings

REST API

Nuclias

REST API is a software interface that allows two applications to communicate with each other over the internet and through

devices. Enable it to allow Nuclias Connect communicate with third-party application through REST API.

System

Settings

Alerts

Nuclias

The Alerts tab allows you to configure the alert event types. Check the types of events that you’d like to generate an alert. To

view generated alerts, go to

Log > Alerts

to view alerts.

Check the Email box to receive Email notification of specific events. Go to

System>Settings>User Management

to edit the

user and select “Receive Email Alert” to allow user to receive alert email from Nuclias Connect. Click

Save

to save the values

and update the screen.

Summary of Contents for Nuclias DNH-100
















































































Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands

D-Link Nuclias DNH-100, User Manual

Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands