D-Link Nuclias DNH-100 User Manual Download Page 49

Page: 49 / 79

Nuclias Connect Software User Manual

Nuclias Connect Configuration

Page 49

Log

Device Log

The Device Log function allows administrators to view alert messages from an AP’s embedded memory. The system and network

messages includes a time stamp and message type. The log information includes but is not limited to the following items:

synchronize device settings, upgrading firmware, upload configuration, and blocking clients.
Navigate to

Log > Device Log

to display the function information.

To start a Device Log, select the operation type and define the period of time to report. Click the drop-down menu to choose

either IP address or Log Details as report criteria. Fill in the keyword field and click to view the generated report.
Once a report has been generated, click to save the report to a local PDF file.

Nuclias

Summary of Contents for Nuclias DNH-100
















































































Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands

D-Link Nuclias DNH-100, User Manual

Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands