D-Link Nuclias DNH-100 User Manual Download Page 40

Page: 40 / 79

Nuclias Connect Software User Manual

Nuclias Connect Configuration

Page 40

Configuration

Firmware Upgrade

The Firmware Upgrade function allows users to perform a firmware upgrade. This is a useful feature that prevents future bugs

and allows for new features to be added your device. For online updates, please confirm your controller is online. For manual

upgrade, please go to your local D-Link website to see if there’s new firmware available.

Navigate to

Configuration > Firmware Upgrade > [Site] > [Network]

Block

Description

Change(Manual

Firmware

Upgrade)

Click to select a firmware file to upload. Files are model

specific.

Check For

Update(Check

Upgrade

Firmware Online)

Click to check if there’s new firmware available on

online server.

Time Start

Click the drop-down menu to select a specific time or to

update immediately.

Click

Apply

to save the above configuration settings.

Click

Clear

to delete the defined settings.

The firmware upgrade status and result can be seen at the bottom of this page. The results can be sorted by Run Time, Name,

IP Address, MAC Address, Model Type and Result.

Nuclias

Summary of Contents for Nuclias DNH-100
















































































Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands

D-Link Nuclias DNH-100, User Manual

Search results

Summary of Contents for Nuclias DNH-100

Reviews:

Related manuals for Nuclias DNH-100

Brands by name

Popular brands