Nuclias Connect Software User Manual
Nuclias Connect Configuration
Page 33
Configuration Profile Settings Device Setting
The Device Settings page allows you to view and configure the login and accessibility settings for access points in this network.
Advanced wireless settings can be configured on this page for both the 2.4GHz and 5GHz frequency bands. Navigate to
Configuration > Profile Settings > [Site] > [Network] > Device Setting
to view existing settings.
Parameter
Description
Username
Enter the administrative username that is used to access the
configuration settings for all access points in the network.
Password
Enter the administrative password that is used to access the
configuration settings for to all access points in the network.
Enable
Check the box to enable the console function.
Console Protocol
Click the radio button to select the console protocol that is
applied to all access points in the network.
Time Out
Click the drop-down menu to select the active console session
time out value.
Enable NTP Server
Check the box to enable the Network Time Protocol (NTP) server
function.
NTP Server
Enter the IP address or domain name of the NTP server.
Select Country
Click the drop-down menu to select the country region of APs in
the network.
Time Zone
Click the drop-down menu to select the time zone.
Enable Daylight Saving
Check the box to enable the daylight saving function.
DST Start (24HR)
Click the drop-down menu to designate the start date and time
for Daylight Saving Time (DST).
DST End (24HR)
Click the drop-down menu to designate the end date and time
for Daylight Saving Time (DST).
DST Offset (minutes)
Click the drop-down menu to select DST Offset time.
External Syslog Server
Enter the IP address or domain name of the external syslog server.
Click
Save
to save the values and update the screen.
Nuclias
Once the settings are updated, the configuration must be uploaded to the related access points. See “Profile Settings” on page
22 for further information.
