Nuclias Connect Software User Manual
Nuclias Connect Configuration
Page 22
Configuration
Profile Settings
The
Profile Settings
function allows for the management of existing networks. Navigate to
Configuration > Profile Settings
to view existing sites. Select a site followed by an available network to view all settings that are available for editing:
SSID
,
VLAN
,
Bandwidth Optimization
,
RF Optimization
,
Schedule
,
Device Setting
,
Performance
,
WLAN Partition
, and
Wireless
Resources
.
Once a network is selected the following screen will appear. The upload configuration function is available on the
Profile
Settings > [Site] > [Network]
page.
For any updates to site or network configuration to take effect, the configuration must be uploaded to the access point. Under
the
Upload Configuration
frame, click the
Time Start
drop-down menu and select the time (Immediate or Select Time) to
update the configuration to the access point.
If Select Time is selected, set the day and time to upload the configuration. Once the Time Start is defined, click
Apply
to initiate
the process.
Under the Run Status frame, the status of the upload configuration function will be reported. Once an update is complete, the
results will be displayed in the
Results
frame.
Nuclias
