Nuclias Connect Software User Manual
Appendix
Page 71
Nuclias Connect App
Once a Nuclias Connect controller connection is established, you will see it listed next to the field Provision File
Tap
Provision File
to select a local AP provision profile. In the following figure, the entry
Nuclias_connect_test_Network132
is available.
After the Select AP Provision file window appears, select an available provision file from local storage and tap
Done
to
continue.
The process will continue and the App wil return to the previous screen. From the Step 1 page, tap
Next
to continue.
From this page, you can discover standalone DAPs connected to the L2/L3 wireless network.
Tap the button on the L2 field to enable discovery on the L2 network.
Tap the button on the L3 field to enable discovery on the L3 network. Then enter an IP range in the provided From and To
fields. Tap add ( ) to create a new IP range entry. Tap remove ( ) to delete any defined range entries.
In the IP range fields, specify the starting and ending IP addresses.. Once the range is defined, tap
Next
to initiate the
discovery process.
