DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Dial number
A number dialed to connect to the authorization server of the
operator.
Authentication
algorithm
Select a required authentication method from the drop-down list or
leave the
AUTO
value.
MTU
The maximum size of units transmitted by the interface.
Optional
.
Keep Alive
Select the checkbox if you want the router to
keep you connected to
the network of your operator even when the connection has been
inactive for a specified period of time. When the checkbox is
selected, the
LCP interval
and
LCP fails
fields are available.
Specify the required values.
Extra options
In the field, you can specify additional data for encryption or
authentication.
Optional
.
Dial on demand
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the
Maximum idle time
field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
PPP debug
Select the checkbox if you want to log
all data on PPP connection
debugging.
Figure 103. The page for creating a new
3G
connection. The
Miscellaneous
section.
Parameter
Description
Miscellaneous
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Ping
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
When all needed settings are configured, click the
Apply
button.
Page
128
of 259
