D-Link DVG-N5402G/ACF User Manual Download Page 157

Page: 157 / 259

DVG-N5402G/ACF

Wireless AC1200 Dual Band Gigabit Router

with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port

User Manual

Configuring via Web-based Interface

Parameter

Description

DTIM Period

The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.

TX Power

The transmit power (in percentage terms) of the router.

Drop multicast

Select the checkbox to disable multicasting for the router's WLAN.
Deselect the checkbox to enable multicasting from WAN
connections for which the

Enable IGMP Multicast

checkbox is

selected.

Bandwidth

The channel bandwidth for 802.11n devices in 2.4GHz band (the

Wi-Fi / Additional settings / 2.4 GHz

page).

20MHz

: 802.11n clients operate at 20MHz channels.

40MHz

: 802.11n clients operate at 40MHz channels.

20/40MHz -

: 802.11n clients operate at 20MHz or 40MHz channels

(the channel is combined with the previous adjacent channel).

20/40MHz +

: 802.11n clients operate at 20MHz or 40MHz channels

(the channel is combined with the next adjacent channel).

The channel bandwidth for 802.11n and 802.11ac devices in 5GHz
band (the

Wi-Fi / Additional settings / 5 GHz

page).

20MHz

: 802.11n and 802.11ac clients operate at 20MHz channels.

40MHz

: 802.11n and 802.11ac clients operate at 40MHz channels.

20/40MHz -

: 802.11n and 802.11ac clients operate at 20MHz or

40MHz channels (the channel is combined with the previous
adjacent channel).

20/40MHz +

: 802.11n and 802.11ac clients operate at 20MHz or

40MHz channels (the channel is combined with the next adjacent
channel).

80MHz

: 802.11ac clients operate at 80MHz channels.

20/40/80MHz -

: 802.11ac clients operate at 20MHz, 40MHz, or

80MHz channels (the channel is combined with the previous
adjacent channels).

20/40/80MHz +

: 802.11ac clients operate at 20MHz, 40MHz, or

80MHz channels (the channel is combined with the next adjacent
channels).

Page

157

of 259

Summary of Contents for DVG-N5402G/ACF




































































































































































































































































Search results

Summary of Contents for DVG-N5402G/ACF

Reviews:

Related manuals for DVG-N5402G/ACF

Brands by name

Popular brands

D-Link DVG-N5402G/ACF, User Manual

Search results

Summary of Contents for DVG-N5402G/ACF

Reviews:

Related manuals for DVG-N5402G/ACF

Brands by name

Popular brands