DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Via Interface
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the
<Auto>
value of this drop-down list, the router itself sets the interface on the
basis of data on connected networks.
After specifying the needed parameters, click the
Apply
button.
To edit an existing route, select a needed field in the relevant line of the table, change its value, and
click the
Apply
button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table
and click the
Delete
button. Then click the
Apply
button.
In the
Routing table
section the information on the routes for IPv6 protocol is displayed. See the
full list of routes on the
Status / Routing table
page.
Page
180
of 259
