DVG-N5402G/ACF
Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Configuring via Web-based Interface
Net
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the
Net
/ WAN
page, you can create and edit connections used by the router.
By default, a
Dynamic IP
connection is configured in the system. It is assigned to the WAN port of
the router. You can edit this connection or delete it.
Figure 67. The
Net / WAN
page.
To create a new connection, click the
Add
button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the
Apply
button.
To remove a connection, select the checkbox located to the left of the relevant line in the table and
click the
Delete
button. Also you can remove a connection on the editing page.
To use one of existing WAN connections as a default IPv4 gateway, select the choice of the
Default
gateway
radio button located in the line corresponding to this connection.
To use one of existing WAN connections as a default IPv6 gateway, select the choice of the
Default
IPv6 gateway
radio button located in the line corresponding to this connection.
Page
92
of 259
