manualshive.com logo in svg

D-Link DVG-5112S, User Manual, Page: 80 / 98

Share
Download
D-Link DVG-5112S User Manual Download Page 80

DVG-5112S User’s Manual 

 

                                                                  MAINTENANCE

 

D-Link Systems, Inc.

                                                                                                                                                          80 

3-3-7 Provision   

 

Provisioning is a function that automatically updates your VoIP Telephone Adapter’s configuration by using 
a TFTP, FTP, or HTTP server located on the Internet. If you have access to such service, you will need to 
know the URL or IP address of the Provisioning Server. 

Note: 

Fill in the parameters needed by your VoIP Service Provider. Please check with your VoIP Service 

Provider about the availability of these services.

 

 

 

MAINTENANCE 

→

 Provision 

 

 

Enable Auto Provisioning: 

Check the box to start provisioning.

 

Provision Server Address:

 Enter the Provisioning Server’s IP address or URL required by your VoIP 

Service Provider.

 

Port:

 Enter the Provisioning Server’s listening port.

 

Packet Format: 

Use the drop-down menu to choose the packet transmitting format required by your VoIP 

Service Provider. 

Verify Servers Certificate:

 It is used for Provision Server certification while HTTPS packet format is in use. 

Connect Provision Server During Start Up:

 Check the box to connect to Provisioning Server when the 

VoIP Telephone Adapter is powered on or rebooted.

 

Summary of Contents for DVG-5112S



































































































Reviews:

No comments