manualshive.com logo in svg

D-Link DVG-5112S, User Manual, Page: 46 / 98

Share
Download
D-Link DVG-5112S User Manual Download Page 46

DVG-5112S User’s Manual 

 

                                                                  ADVANCED

 

D-Link Systems, Inc.

                                                                                                                                                         

46 

Method 3- Substitution:

 It helps you dial to destination that you can not dial by phone. Destination like: 

[email protected]. Fill the number into the 

Scan Code

 column and enter the desired name into the 

VoIP Dial-out 

column. 

 

For example, 

Scan Code: 11 

VoIP Dial-out: AnnyKC 

User Dial Length: Disable 

Route: VoIP 

VoIP Route Profile: Route # 5 

 

 

 

Pick up the handset and dial 11. The system will do the things as follow: 

1.  Change the phone number to the global number. 11 is changed to “AnnyKC”.   

2.  It sends “AnnyKC” to Server3 followed the VoIP Route Profile # 5. 

If the VoIP route is failed, the call is disconnected.   

Summary of Contents for DVG-5112S



































































































Reviews:

No comments