D-Link DGS-3620-28PC-EI, Product Manual

Page: 138 / 502

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
128
Parameter Description
Ports / VID List
Select the appropriate port(s) or VLAN IDs used for the configuration.
Access
Assign access permissions to the ports selected. Options listed are
Permit
and
Deny
.
Profile ID / Profile
Name
Use the drop-down menu to select the profile ID or profile name used and then assign
Permit
or
Deny
access to them.
Click the
Apply
button to accept the changes made.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete
button to remove the specific entry.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
IPv4 Max Multicast Group Settings
Users can configure the ports and VLANs on the switch that will be a part of the maximum filter group, up to a
maximum of 1024.
To view the following window, click
L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Max
Multicast Group Settings
, as show below:
Figure 4-93 IPv4 Max Multicast Group Settings window
The fields that can be configured are described below:
Parameter Description
Ports / VID List
Select the appropriate port(s) or VLAN IDs used for the configuration here.
Max Group (1-1024)
If the checkbox
Infinite
is not selected, the user can enter a
Max Group
value.
Infinite
Tick the check box to enable or disable the use of the Infinite value.
Action
Use the drop-down menu to select the appropriate action for this rule. The user can
select
Drop
to initiate the drop action or the user can select
Replace
to initiate the
replace action.
Click the
Apply
button to accept the changes made.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
IPv6 Multicast Filtering
Users can add a profile to which multicast address(s) reports are to be received on specified ports on the Switch.
This function will therefore limit the number of reports received and the number of multicast groups configured on
the Switch. The user may set an IPv6 Multicast address or range of IPv6 Multicast addresses to accept reports
(Permit) or deny reports (Deny) coming into the specified switch ports.