xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
222
Figure 5-96 PIM for IPv6 Candidate RP Settings window
The fields that can be configured are described below:
Parameter
Description
Group
Enter the IPv6 group address range served by the RP.
Interface Name
Enter the interface that will act as the Candidate RP.
Interface Name
Enter the RP IP interface used. Tick the
All
check box to select all RP IP interface.
Priority (0-255)
Enter the RP priority value that will be used in the election process.
Interval (1-16383)
Enter the Candidate RP advertisement interval in seconds.
Click the
Add
button to add a new entry based on the information entered.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specific entry.
PIM for IPv6 Static RP Settings
This window is used to create a static RP.
To view the following window, click
L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 Static RP Settings
, as shown below:
Figure 5-97 PIM for IPv6 Static RP Settings window
The fields that can be configured are described below:
Parameter
Description
Group
Enter the multicast group network address for this static RP.
RP Address
Enter the IPv6 address to this static RP.
Override Dynamic
Tick the check box so that the static RP will override any dynamically learned RP.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete
button to remove the specific entry.
PIM for IPv6 Neighbor Table
Summary of Contents for DGS-3620-28PC-EI
Page 1: ......