xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
61
Chapter 4
L2 Features
VLAN
QinQ
Layer 2 Protocol Tunneling Settings
Spanning Tree
Link Aggregation
FDB
L2 Multicast Control
Multicast Filtering
ERPS Settings
LLDP
NLB FDB Settings
PTP
VLAN
Priority tagging is a function defined by the IEEE 802.1p standard designed to provide a means of managing traffic
on a network where many different types of data may be transmitted simultaneously. It is intended to alleviate
problems associated with the delivery of time critical data over congested networks. The quality of applications that
are dependent on such time critical data, such as video conferencing, can be severely and adversely affected by
even very small delays in transmission.
Understanding IEEE 802.1p Priority
Network devices that are in compliance with the IEEE 802.1p standard have the ability to recognize the priority
level of data packets. These devices can also assign a priority label or tag to packets. Compliant devices can also
strip priority tags from packets. This priority tag determines the packet’s degree of expeditiousness and determines
the queue to which it will be assigned.
Priority tags are given values from 0 to 7 with 0 being assigned to the lowest priority data and 7 assigned to the
highest. The highest priority tag 7 is generally only used for data associated with video or audio applications, which
are sensitive to even slight delays, or for data from specified end users whose data transmissions warrant special
consideration.
The Switch allows you to further tailor how priority tagged data packets are handled on your network. Using queues
to manage priority tagged data allows you to specify its relative priority to suit the needs of your network. There
may be circumstances where it would be advantageous to group two or more differently tagged packets into the
same queue. Generally, however, it is recommended that the highest priority queue, Queue 7, be reserved for data
packets with a priority value of 7. Packets that have not been given any priority value are placed in Queue 0 and
thus given the lowest priority for delivery.
Strict mode and weighted round robin system are employed on the Switch to determine the rate at which the
queues are emptied of packets. The ratio used for clearing the queues is 4:1. This means that the highest priority
queue, Queue 7, will clear 4 packets for every 1 packet cleared from Queue 0.
Remember, the priority queue settings on the Switch are for all ports, and all devices connected to the Switch will
be affected. This priority queuing system will be especially beneficial if your network employs switches with the
capability of assigning priority tags.
A Virtual Local Area Network (VLAN) is a network topology configured according to a logical scheme rather than
the physical layout. VLANs can be used to combine any collection of LAN segments into an autonomous user
group that appears as a single LAN. VLANs also logically segment the network into different broadcast domains so
VLAN Description
Summary of Contents for DGS-3620-28PC-EI
Page 1: ......
