manualshive.com logo in svg

D-Link DGS-3620-28PC-EI, Product Manual

The D-Link DGS-3620-28PC-EI is a high-performance switch that offers advanced features for efficient network management. Access its detailed Product Manual for free download at manualshive.com, providing comprehensive instructions and insights on maximizing the switch's capabilities. Get the most out of your device with this invaluable resource!

Share
Download
background image

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide 

471 

 

session: The user’s session. 

username: Represent current login user. 

ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

 

Event description: Log message upload unsuccessfully. 

Log Message: [RCP(10):]Log message upload by <session> unsuccessfully. 

(Username: <username>, IP: <ipaddr>, MAC: <macaddr>) 

 

Parameters description: 

session: The user’s session. 

username: Represent current login user. 

ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

Warning 

 

 

Event description: The downloaded configurations executed successfully. 

Log Message: [RCP(11):]The downloaded configurations executed by 

<session> successfully. (Username: <username>, IP: <ipaddr>, MAC: 

<macaddr>) 

 

Parameters description: 

session: The user’s session. 

username: Represent current login user. 

ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

Informational 

 

 

Event description: The downloaded configurations execute unsuccessfully. 

Log Message: [RCP(12):]The downloaded configurations executed by 

<session> unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC: 

<macaddr>) 

 

Parameters description: 

session: The user’s session. 

username: Represent current login user. 

ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

Warning 

 

 

Event description: Attack log message uploaded successfully. 

Log Message: [RCP(13):]Attack log message uploaded by <session> 

successfully. (Username: <username>, IP: <ipaddr>, MAC: <macaddr>) 

 

Parameters description: 

session: The user’s session. 

username: Represent current login user. 

ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

Informational 

 

 

Event description: Attack log message upload unsuccessfully. 

Log Message: [RCP(14):]Attack log message upload by <session> 

unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC: <macaddr>) 

 

Parameters description: 

session: The user’s session. 

username: Represent current login user. 

ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

Warning 

 

TFTP Client 

Event description: Firmware upgraded successfully. 

Log Message: [TFTP(1):] [Unit <unitID>,] Firmware upgraded by <session> 

successfully (Username: <username>, IP: <ipaddr>, MAC: <macaddr>) 

 

Parameters description: 

UnitID: Represent the id of the device in the stacking system. 

session: The user’s session. 

Username: Represent current login user. 

Ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

Informational 

 

 

Event description: Firmware upgrade was unsuccessful. 

Log Message: [TFTP(2):] [Unit <unitID>,] Firmware upgrade by <session> 

was unsuccessful! (Username: <username>, IP: <ipaddr>, MAC: 

<macaddr>) 

 

Parameters description: 

UnitID: Represent the id of the device in the stacking system. 

session: The user’s session. 

Username: Represent current login user. 

Ipaddr: Represent client IP address. 

macaddr : Represent client MAC address. 

Warning 

 

 

Event description: Firmware successfully uploaded. 

Log Message: [TFTP(3):]Firmware successfully uploaded by <session> 

(Username: <username>, IP: <ipaddr>, MAC: <macaddr>) 

 

Parameters description: 

session: The user’s session. 

Username: Represent current login user. 

Informational 

 

Summary of Contents for DGS-3620-28PC-EI























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3620-28PC-EI

D-Link DGS-1024D - Switch Quick Installation Manual preview
DGS-1024D - Switch
Brand: D-Link Pages: 16
D-Link DGS-1016D - Switch User Manual preview
DGS-1016D - Switch
Brand: D-Link Pages: 44
D-Link DES-6000 Series Firmware Update Manual preview
DES-6000 Series
Brand: D-Link Pages: 3
D-Link DES-5024 - Switch Application Notes preview
DES-5024 - Switch
Brand: D-Link Pages: 2
D-Link DES-3828 - xStack Switch - Stackable Datasheet preview
DES-3828 - xStack Switch - Stackable
Brand: D-Link Pages: 3
D-Link DES-3550 User Manual preview
DES-3550
Brand: D-Link Pages: 192
D-Link DES-3326 Configuration Manual preview
DES-3326
Brand: D-Link Pages: 9
D-Link DES-3226L User Manual preview
DES-3226L
Brand: D-Link Pages: 110
D-Link DES-1026G User Manual preview
DES-1026G
Brand: D-Link Pages: 10
D-Link DES-1008D Manual preview
DES-1008D
Brand: D-Link Pages: 17
D-Link DES-1005P Quick Install Manual preview
DES-1005P
Brand: D-Link Pages: 4
D-Link DGS-1210-28P Manual preview
DGS-1210-28P
Brand: D-Link Pages: 9
D-Link DES-1024D Brochure preview
DES-1024D
Brand: D-Link Pages: 4
D-Link DGS-105 - Switch Datasheet preview
DGS-105 - Switch
Brand: D-Link Pages: 4
D-Link DES-1024D Quick Install Manual preview
DES-1024D
Brand: D-Link Pages: 2
D-Link des-1016a Quick Install Manual preview
des-1016a
Brand: D-Link Pages: 2
FANATEC PODIUM Quick Manual preview
PODIUM
Brand: FANATEC Pages: 40
Meridian SX-4FX Series Installation & Operation Instructions preview
SX-4FX Series
Brand: Meridian Pages: 16

Brands by name

Popular brands

Load more brands