xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
327
1. Ports supporting Guest VLANs cannot be GVRP enabled and vice versa.
Limitations Using the Guest VLAN
2. A port cannot be a member of a Guest VLAN and a static VLAN simultaneously.
3. Once a client has been accepted into the target VLAN, it can no longer access the Guest VLAN.
Remember, to set an 802.1X guest VLAN, the user must first configure a normal VLAN, which can be enabled here
for guest VLAN status. Only one VLAN may be assigned as the 802.1X guest VLAN.
To view this window, click
Security > 802.1X > Guest VLAN Settings
as shown below:
Figure 8-13 Guest VLAN Settings window
The fields that can be configured are described below:
Parameter
Description
VLAN Name
Enter the pre-configured VLAN name to create as an 802.1X guest VLAN.
Port
Set the ports to be enabled for the 802.1X guest VLAN. Click the
All
button to select all the
ports.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specific entry based on the information entered.
Authenticator State
This window is used to display the authenticator state. This window appears when the
Authentication State
is
enabled in 802.1X Global Settings window.
To view this window, click
Security > 802.1X > Authenticator State
as shown below:
Figure 8-14 Authenticator State window
The fields that can be configured are described below:
Parameter
Description
Unit
Select a unit you want to display.
Port
Use the drop-down menu to select a port to display.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Refresh
button to refresh the display table so that new entries will appear.
Summary of Contents for DGS-3620-28PC-EI
Page 1: ......
