D-Link DGS-1210/ME series Page 505 Reference Manual Download

Page: 505 / 522

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

485

Type field.

•

code

– Specifies that the Switch examine each frame’s

ICMP code field.

•

type

– Specifies that the Switch examine each frame’s IGMP

Type field.

tcp –

Specifies that the Switch examines each frames protocol

field and its value must be 6 (Transmission Control Protocol-
TCP) for the action to take place.

•

src_port_mask <hex 0x0-0xffff>

– Specifies the TCP port

mask for the source port.

•

dst_port_mask <hex 0x0-0xffff>

– Specifies the TCP port

mask for the destination port.

•

flag_mask - Specifies the appropriate flag.

udp –

Specifies that the Switch examines each frame’s protocol

field and it’s value must be 17 (User Datagram Protocol-UDP) in
order for the action to take place.

•

src_port_mask <0x0-0xffff>

– Specifies the UDP port mask

for the source port.

•

dst_port_mask <0x0-0xffff>

– Specifies the UDP port mask

for the destination port mask.

•

protocol_id_mask <0x0-0xffff>

– Specifies the protocol id

mask.

•

source_ip_mask <netmask>

– Specifies the source IPv4

mask.

•

destination_ip_mask <netmask>

– Specifies the destination

IPv4 mask.

dscp

– Specifies that the Switch examines the DiffServ Code Point

(DSCP) field in each frame’s header.

ipv6

- Specifies that the Switch examines the IPv6 fields in each

packet with special emphasis on one or more of the following:

•

class –

Examine the class field of the IPv6 header.

•

source_ipv6_mask <ipv6mask>

– Specifies the source IPv6

mask.

•

destination_ipv6_mask < ipv6mask >

– Specifies the

destination IPv6 mask.

profile_id <value 1-3>

– Specifies the cpu access profile to be

displayed.

Restrictions

Only administrator or operate-level users can issue this command.

Example usage:

To create a CPU IP access profile:

DGS-1210-28MP/ME:5# create cpu access_profile ip source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type profile_id 2

Command:

create cpu access_profile ip source_ip_mask 20.0.0.0

destination_ip_mask 10.0.0.0 dscp icmp type profile_id 2

Success.

DGS-1210-28MP/ME:5#

Summary of Contents for DGS-1210/ME series










































































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-1210/ME series

Reviews:

Related manuals for DGS-1210/ME series

Brands by name

Popular brands

D-Link DGS-1210/ME series, Reference Manual

Search results

Summary of Contents for DGS-1210/ME series

Reviews:

Related manuals for DGS-1210/ME series

Brands by name

Popular brands