D-Link DGS-1210/ME series Reference Manual Download Page 226

Page: 226 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

206

config cos mapping

Purpose

To configure the method of which incoming packets will be identified
for the CoS to port mapping feature.

Syntax

config cos mapping port [<portlist> | all] [802.1p | dscp_tos |
none]

Description

The

config cos mapping port

command is used to configure the

method of which incoming packets will be identified for the CoS to
port mapping feature on the Switch.

Parameters

<portlist>

- A port or range of ports to be configured.

all

- Specifies all ports to be configured on the Switch.

[802.1p | dscp | none]

– Specified which incoming packets will be

identified for the CoS.

Restrictions

Only administrator or operator-level users can issue this command.

Example usage:

To configure the CoS mapping on the Switch:

DGS-1210-28MP/ME:5# config cos mapping port all 802.1p

Command: config cos mapping port all 802.1p

Success.

DGS-1210-28MP/ME:5#

show cos mapping

Purpose

To display the information regarding CoS mapping enabled ports
and their mapping method.

Syntax

show cos mapping {port <portlist>}

Description

The

show cos mapping

command displays the information

regarding CoS mapping enabled ports and their mapping method.

Parameters

<portlist>

- A port or range of ports to be displayed.

Restrictions

None.

Example usage:

To display the CoS mapping on the Switch:

DGS-1210-28MP/ME:5# show cos mapping port 1-5

Command: show cos mapping port 1-5

Port Ethernet_Priority IP_Priority

------------------------------------------------------

1 802.1p DSCP

2 802.1p DSCP

3 802.1p DSCP

4 802.1p DSCP

5 802.1p DSCP

Summary of Contents for DGS-1210/ME series










































































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-1210/ME series

Reviews:

Brands by name

Popular brands

D-Link DGS-1210/ME series, Reference Manual

Search results

Summary of Contents for DGS-1210/ME series

Reviews:

Brands by name

Popular brands