DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
192
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To configure traffic control and enable broadcast storm control system wide:
DGS-1210-28MP/ME:5# config traffic control all multicast enable unicast disable
broadcast enable threshold 64
Command: config traffic control all multicast enable unicast disable broadcast e
nable threshold 64
*Note: Setting count down for drop mode port was ignored.
Success.
DGS-1210-28MP/ME:5#
config traffic control auto_recover_time
Purpose
To configure the traffic auto recover time that allowed for a port to
recover from shutdown forever status.
Syntax
config traffic control auto_recover_time [0 | <min 1-65535>]
Description
The
config traffic control
auto_recover_time
command
configures the auto recover time for traffic control.
Parameters
[0 | <min 1-65535>]
– Specifies the auto recover time for traffic
control The value is or from 1 to 65535.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To configure auto recover time for traffic control:
DGS-1210-28MP/ME:5# config traffic control auto_recover_time 1000
Command: config traffic control auto_recover_time 1000
Success.
DGS-1210-28MP/ME:5#
show traffic control
Purpose
To display current traffic control settings.
Syntax
show traffic control {<portlist>}
Description
The
show traffic control
command displays the current storm traffic
control configuration on the Switch.
Parameters
<portlist>
- A port or range of ports whose settings are to be
displayed.
Restrictions
None.
Example usage:
To display traffic control setting for ports 1-3:
DGS-1210-28MP/ME:5# show traffic control 1-3
Command: show traffic control 1-3
