DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
51
DGS-1210-28MP/ME:5# config ports 8-11 capability_advertised 10G_full
Command: config ports 8-11 capability_advertised 10G_full
Success
DGS-1210-28MP/ME:5#
show ports
Purpose
To display the current configuration of a range of ports.
Syntax
show ports {<portlist> | all} {[description | err_disabled]}
Description
The
show ports
command displays the current configuration of
range of ports or all ports.
Parameters
<portlist>
− A port or range of ports whose settings are to be
displayed.
all –
Specifies all ports to be displayed.
description –
To display description for specified ports.
err_disabled –
To display err_disabled for specified ports.
Restrictions
None.
Example usage:
To display the description of port 13 on the Switch:
DGS-1210-28MP/ME:5# show ports 13 description
Command: show ports 13 description
Port State/ Settings Connection Address Auto
Type MDI Speed/Duplex/FlowCtrolSpeed/DuplexFlowCtrolLearning Downgrade
------- ------------- ----------------------------- ----------------------- -------------- --------------
1 Enabled Auto/Disabled Link Down Enabled Disabled
Desc:
DGS-1210-28MP/ME:5#
show ports
Purpose
To display the current configuration of a range of ports.
Syntax
show ports {<portlist> | all} [auto_negotiation | media_type |
linkup_time]
Description
The
show ports
command displays the current configuration of
range of ports or all ports.
Parameters
<portlist>
− A port or range of ports whose settings are to be
displayed.
all –
Specifies all ports to be displayed.
auto_negotiation –
Specifies to display the port auto-negotiation
information.
media_type
–
Specifies to display the media type of the port.
linkup_time –
Specifies to display the linkup time information of
