DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
371
reauthentications.
ReAuthenticate:
true/false
− Shows whether or not to reauthenticate.
Parameters
ports <portlist>
− Specifies a port or range of ports to be viewed.
Restrictions
None.
Example usage:
To display the 802.1x configurations of port 2:
DGS-1210-28MP/ME:5# show 802.1x auth_configuration ports 2
Command: show 802.1x auth_configuration ports 2
Authentication Mode : Port_base
Port number : 2
Capability : none
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : ForceAuthorized
QuietPeriod : 60 sec
TxPeriod : 30 sec
SuppTimeout : 30 sec
ServerTimeout : 30 sec
MaxReq : 2 times
ReAuthPeriod : 3600 sec
ReAuthenticate : Disable
DGS-1210-28MP/ME:5#
config 802.1x auth_parameter ports
Purpose
To configure the 802.1x authentication parameters on a range of
ports. The default parameter returns all ports in the specified range
to their default 802.1x settings.
Syntax
config 802.1x auth_parameter ports [<portlist> | all] [default |
{ port_control [force_unauth | auto | force_auth] | quiet_period
<sec 0-65535> | tx_period <sec 1-65535> | supp_timeout <sec 1-
65535> | server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | enable_reauth [enable | disable] |
direction [both | in]}]
Description
The
config 802.1x auth_parameter ports
command configures the
802.1x authentication parameters on a range of ports. The default
parameter returns all ports in the specified range to their default
802.1x settings.
Parameters
[<portlist> | all] –
A port, range of ports or all ports to be configured.
all –
Specifies all of the ports on the Switch.
default –
Returns all of the ports in the specified range to their
802.1x default settings.
port_control –
Configures the administrative control over the
authentication process for the range of ports. The options are:
•
force_auth
– Forces the Authenticator for the port to
become authorized. Network access is allowed.
