DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
154
separated into three tables, labeled A, B, and C in the window
below. Table A is relevant to the size of the packets, Table B is
relevant to the type of packets and Table C is relevant to the type of
frame associated with these packets.
Parameters
<portlist>
− A port or range of ports whose statistics are to be
displayed.
Restrictions
None.
Example usage:
To display the packets analysis for port 1:
DGS-1210-28MP/ME:5# show packet ports 1
Command: show packet ports 1
Port Number : 1
Frame Size Frame Counts Frames/sec Frame Type Total Total/sec
---------------- -------------------- ----------------- ----------------- --------- ---------------
64 0 0 RX Bytes 0 0
65-127 0 0 RX Frames 0 0
128-255 0 0
256-511 0 0 TX Bytes 0 0
512-1023 0 0 TX Frames 0 0
1024-1518 0 0
Unicast RX 0 0
Multicast RX 0 0
Broadcast RX 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show error ports
Purpose
To display the error statistics for a port or a range of ports.
Syntax
show error ports <portlist>
Description
The
show error ports
command displays all of the packet error
statistics collected and logged by the Switch for a given port list.
Parameters
<portlist>
− A port or range of ports whose error statistics are to be
displayed.
Restrictions
None.
Example usage:
To display the errors of port 2:
DGS-1210-28MP/ME:5# show errors port 1
Command: show error ports 1
Port Number : 1
