DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
435
60
ACCESS AUTHENTICATION CONTROL COMMANDS
The Access Authentication Control commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
Parameter
create authen_login
method_list_name
<string 15>
config authen_login
[default | method_list_name <string 15>] method [ | radius |
local | server_group <string 15> | none]
delete authen_login
method_list_name
<string 15>
show authen_login
[all | default | method_list_name <string 15>]
show authen_policy
create authen_enable
method_list_name
<string 15>
config authen_enable
[default | method_list_name <string 15>] method { | radius |
local | server_group <string 15> | none}
delete authen_enable
method_list_name
<string 15>
show authen_enable
[all | default | method_list_name <string 15>]
enable authen_policy
disable authen_policy
config authen application
{console | http | ssh | telnet | all] [login | enable] [default |
method_list_name <string 15>]
show authen application
config authen parameter
[attempt <int 1-255> | response_timeout <int 0-255>]
show authen parameter
create authen server_host
[<ipaddr> | ipv6address <ipv6addr>] protocol [radius | ]
{ acct_port <int 1-65535> | port <int 1-65535> | key [<string 254> |
encryption_key <string 800> | none] | timeout <int 1-255> | retransmit
<int 1-255>}
config authen server_host
[<ipaddr> | ipv6address <ipv6addr>] protocol [ | radius]
{acct_port <int 1-65535> | port <int 1-65535> | encryption_key <string
800> | key [<string 254> | none] | timeout <int 1-255> | retransmit <int
1-255>}
delete authen server_host
[<ipaddr> | ipv6address <ipv6addr>] protocol [ | radius]
show authen server_host
create authen server_group
<string 15>
config authen server_group
[<string 15> | radius | ] [add | delete] server_host [<ipaddr> |
