D-Link DGS-1210/ME series Reference Manual Download Page 169

Page: 169 / 522

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

149

| <portlist>]] [add | delete] time_range1 <range_name 20>
time_range2 <range_name 20> {clear_time_range}

Description

The

config power_saving

command is used to configure the power

saving on the switch.

Parameters

hibernation –

Configure the hibernation.

led [all | <portlist>] –

Configure the ports for led.

port –

Configure ports.

[add | delete] –

Add or delete time range for power saving mode.

time_range1 <range_name 20> –

Specifies the time range 1 to be

configured.

time_range2 <range_name 20> –

Specifies the time range 2 to be

configured.

{clear_time_range} –

Clear the time range setting for power saving

on the Switch.

Restrictions

Only Administrator or operator–level users can issue this command.

Example usage:

To configure the power saving on the switch:

DGS-1210-28MP/ME:5#

config power_saving mode port hibernation enable

Command: config power_saving mode port hibernation enable

Success.

DGS-1210-28MP/ME:5#

show power_saving

Purpose

To display power saving information on the switch.

Syntax

show power_saving {hibernation | led | length_detection | port |
link_detection}

Description

The

show power_saving

is used to display power saving

information.

Parameters

hibernation –

Display the hibernation state.

led –

Display the led state.

length_detection –

Display the length detection state.

port –

Display ports state.

link_detection –

Display link detection state.

Restrictions

None.

Example usage:

To display power saving information on the switch:

DGS-1210-28MP/ME:5#

show power_saving length_detection

Command: show power_saving length_detection

Length Detection State : Enabled

DGS-1210-28MP/ME:5#

Summary of Contents for DGS-1210/ME series










































































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-1210/ME series

Reviews:

Brands by name

Popular brands

D-Link DGS-1210/ME series, Reference Manual

Search results

Summary of Contents for DGS-1210/ME series

Reviews:

Brands by name

Popular brands