D-Link DGE-560SX User Guide
96
Running Diagnostic Tests
The
Diagnostic Tests
option on the
Diagnostics
tab lets you check the state of the physical
components on a Broadcom network adapter. You can trigger the tests manually, or choose
to have BACS 4 continuously perform them. If the test are performed continuously, then the
number of passes and fails in the
Result
field for each test increments every time the tests
are performed. For example, if a test is performed four times and there are no fails, the value
in the
Result
field for that test is 4/0. However, if there were 3 passes and 1 fail, the value
in the
Result
field is 3/1.
NOTES:
o
You must have administrator privileges to run diagnostic tests.
o
The network connection is temporarily lost while these tests are running.
o
Some tests are not supported on all Broadcom adapters.
To run the diagnostic tests once
1.
Click the name of the adapter to test in the Explorer View pane and select the
Diagnostics tab.
2.
From the
Select a test to run
list, select
Diagnostic Tests
.
