D-Link DGE-560SX User Guide
112
12.
Select a listed team member, click
Edit Member IP Address
, and then type the
member IP address in the IP Address box. Repeat for all listed team members and
then click
OK
. Click
Next
.
Note: All of the member IP addresses must be in the same subnet as the subnet of
the probe targets.
13.
If you want to create a VLAN on the team, select
Add VLAN
, or if you want to change
the settings of an existing VLAN, select
Edit VLAN
, then click
Next
. If you do not
want to create or edit a VLAN, select
Skip Manage VLAN
, then click
Next
, and
continue with the wizard from the Finish screen (see Step 18. of this procedure).
VLANs enable you to add multiple virtual adapters that are on different subnets.
The benefit of this is that your system can have one network adapter that can
belong to multiple subnets.
Note: VLANs can only be created when all team members are Broadcom adapters.
14.
Type the VLAN name and then click
Next
.
Note: The team name cannot exceed 39 characters, cannot begin with spaces, and
cannot contain any of the following characters: & \ / : * ? < > |
