D-Link DGE-560SX User Guide
22
3.2.2 Setting Up MBA in a Client Environment
Use the following procedure for add-in NICs. For LOMs, refer to your computer's system
guide.
Setting up MBA in a client environment involves the following steps:
1.
Enabling the MBA driver.
2.
Configuring the MBA driver.
3.
Setting up the BIOS for the boot order.
Enabling the MBA Driver
To enable or disable the MBA driver:
1.
Insert the driver source media in the CD-ROM drive and boot up in DOS mode.
2.
Type:
drive
:\dos\utility
where
drive
is the drive letter of the CD-ROM drive.
NOTE: The B57udiag.exe file is on the installation CD.
3.
Type:
b57udiag -mba [ 0-disable | 1-enable ] -c
devnum
where
devnum
is the specific device(s) number (0,1,2, ...) to be programmed.
Specifying the MBA Protocol
To specify the MBA protocol:
1.
Place the driver source media in the CD-ROM drive and boot up in DOS mode.
2.
Type:
drive
:\dos\utility
