D-Link DGE-560SX User Guide
70
12.
Press INSERT.
13.
Type the name for the protocol, such as
BASP1
for TEAM 1,
BASP2
for TEAM 2,
BASP3
for TEAM 3, or
BASP4
for TEAM 4.
14.
Press ESC to return to the
Internetworking Configuration
console.
15.
Select
Bindings
.
16.
Press INSERT to configure the protocol.
17.
Select
TCP/IP
, then press ENTER.
18.
Select
A Network Interface,
then press ENTER.
19.
Select a virtual adapter (BASP, for example).
20.
Define the IP address.
21.
Press ESC, and then select
Yes
to save.
Repeat steps 16 through 21 to configure IPX and multiple frame types.
NOTE: The physical adapters must be configured with the same frame types as the virtual
team
1.
Press INSERT to bind the physical adapter to a virtual team.
2.
Select
User-specified Protocol
.
3.
Select
A Network Interface
, and then press ENTER.
4.
Select a physical adapter (B57, for example).
5.
Type BASP1 for Protocol.
6.
Select a frame type, type any special parameters (refer to B57.LAN readme.txt for
parameters), press ESC, then select
Yes
to save.
NOTES:
o
Use names such as
BASP1
for TEAM 1,
BASP2
for TEAM 2,
BASP3
for TEAM 3
and
BASP4
for TEAM 4.
o
When you modify a team, you may need to reboot after reinitialization for the
changes to take effect.
Repeat steps 22 through 27 to configure an additional physical driver and to configure
additional frame types. The configuration can be viewed in the
View Configuration - All
INETCFG Commands
console.
