D-Link DGE-560SX User Guide
23
where
drive
is the drive letter of the CD-ROM drive.
3.
Type:
b57udiag -mbap [ 0-pxe | 1-rpl | 2-bootp ] -c devnum
where
devnum
is the specific device(s) number (0,1,2,...) to be programmed.
Forcing the MBA to a Specific Speed
To force the MBA to a specific speed
1.
Place the driver source media in the CD-ROM drive and boot up in DOS mode.
2.
Type:
drive:\dos\utility
where
drive
is the drive letter of the CD-ROM drive.
3.
Type:
b57udiag -mbas [ 0-Auto | 1-10HD | 2-10FD | 3-100H | 4-100F ] -c
devnum
where
devnum
is the specific device(s) number (0,1,2,...) to be programmed.
Configuring the MBA Driver
NOTE: You can use the MBA Configuration Menu to configure the MBA driver one adapter
at a time as described below, or you can use the D-Link NetXtreme User Diagnostics MS-DOS
based application to simultaneously configure the MBA driver for multiple adapters.
1.
Restart your system.
2.
Press CTRL+S within 4 seconds after you are prompted to do so.
