DES-3226L Layer 2
Fast Ethernet Switch User’s Guide
The following parameters can be set:
Parameter
Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
Group Name
This name is used to specify the SNMP group created that can request
SNMP messages.
encrypted
Checking the corresponding box will enable encryption for SNMP V3 and is
only operable in SNMP V3 mode. This will also make the
Method
,
Auth-
Protocol
and
PrivProtocol
parameters operable.
Method
The user may choose between
by_password
and
by_key
for the method of
encryption used for the SNMP function.
Auth-Protocol
None
−
Indicates that no authorization protocol is in use.
MD5
−
Indicates that the HMAC-MD5-96 authentication level will be used.
SHA
−
Indicates that the HMAC-SHA authentication protocol will be used
.
Priv-Protocol
None
−
Indicates that no authorization protocol is in use.
DES
−
Indicates that DES 56-bit encryption is in use based on the CBC-
DES (DES-56) standard.
Management Station IP Addresses
Management stations are computers on the network that will be used to manage the switch.
You can limit the number of possible management stations by entering up to three IP
addresses. If the three IP Address
fields contain all zeros (“0”), then any station with any IP
address can access the switch to manage and configure it. If there is one or more IP addresses
entered in the
IP Address
fields, then only stations with the IP addresses entered will be
allowed to access the switch to manage or configure it. To view and configure the
Management Station IP
window, open the
Basic Setup
folder, then click
Network
Management
>
Management Station IP Addresses
, which opens the following screen.
\
Figure 5-23. Management Station IP Addresses window
42
